source: t29-www/en/devices/ibm1130-blog.php @ 669

Last change on this file since 669 was 669, checked in by heribert, 5 years ago

Blog-Übersetzung aktualisiert

File size: 4.1 KB
Line 
1<?php
2        $seiten_id = 'ibm1130-blog';
3        $version = '$Id';
4        $titel = 'IBM 1130 Reparation Blog';
5       
6        require '../../lib/technikum29.php';
7?>
8
9<h2>IBM 1130 Reparation Blog, continuation</h2>
10
11<br>
12
13The beginning you'll find here <a href="/en/computer/ibm1130.php#blog-ibm"> <b>IBM-Blog, start</b> </a>
14<br><br>
15
16<b>7.6.2014:</b> The card 7432 we are looking for is only used in systems with a memory
17expansion. These mainframes are much rarer than the smaller IBM 1130 systems
18without the additional left enclosure. Therefore both, the card missing in
19out machine as well as its schematics have apparently not been preserved.
20Accordingly, we reverse-engineered the circuit diagram based on measurements
21on an existing card and rebuilt the card. Now the core memory of our IBM 1130
22is working like a charm which is a significant milestone.<br><br>
23
24<div class="desc-left">
25                <a class="popup" href="/shared/photos/rechnertechnik/1130-reparatur.jpg">
26        <img src="/shared/photos/rechnertechnik/1130-reparatur.jpg" alt="1130 während der Reparatur" width="391" height="269" /></a>
27        <p class="small">So it looks while repairing. Invisible: Measuring Park and many simultaneously opened Manuals.<br>
28Enlarge: click on picture!</p></div>
29
30<b>16.6.2014:</b> Giant leaps: After an intensive cleaning effort with adjustments following,
31the card reader IBM 1442 is now fully operational and we could successfully
32run the seven so-called "One-Card-Diagnostic" programs. This demonstrated
33that the CPU is at least basically operating (since these tests are quite
34simple in nature they can not detect subtle faults).<br>
35The next test involved the console printer: A working console printer is necessary to communicate
36with the machine - unfortunately, this test showed that the printer is still
37faulty. Currently, we suspect resinified oil as the culprit. <br><br>
38
39<b>31.08.2014:</b> We would like to thank the people from the "Verein fuer ein Museum
40der Lochkartentechnik", cosecans.ch, who donated a set of plug in cards
41for the IBM 1131 processor. Without these spares our repair attempts would be
42next to impossible due to the SLT technology.<br>
43 Further tests showed that memory and CPU test run flawlessly but the
44keyboard/printer-test still fails.<br><br>
45
46<b>07.09.2014:</b> We experienced some set-backs during our initial restoration
47attempts. This was not that unexpected since the machines have been sitting
48idle for several decades. We have at least two different problems in the
49machine. Without diagnostic programs, any repair attempt would be in vain. Just
50the keyboard/printer test shows an error:<br>
51
52"E0001   INVLD" denoting an erroneous
53address in the switch register for that particular test. Unfortunately the
54address set on the switches is correct so another problem is still lurking in
55the machine.<br><br>
56
57<b>13.09.2014:</b> The next step involved testing the card punch 1442 by means of
58the diagnostic tests. The test program punches cards with certain patterns in
59a first step. These cards are then read back in a second step and compared
60with the expected patterns to reveal any differences. Our punch only punches
61the first 40 columns of a card which is obviously an error. Fortunately, the
62console printer works fine despite the error message generated by the
63console-test program (07.09.2014).<br><br>
64
65<b>20.09.2014:</b> We are currently creating a list of known problems regarding the
661132 printer. Its restoration is especially challenging. After being unused
67for more than 30 years, the oil has become gummy, so just powering the
68printer is not an option, too many things could and would be damaged. Thus,
69all moving parts have to be inspected manually. It turned out that the
70central driveshaft is stuck. Therefore, the motor was removed and restored
71indecently. In addition to this, the remaining printer parts have been heated
72with a heater blower and sprayed with W40 lubricating oil. After these steps,
73the driveshaft could be rotated manually, so the motor was installed again.
74Now the mechanics of the printer runs smoothly without any signs of trouble.<br><br>
75
76<p><b><em>This section will be gradually continued.</em></b></p>
77
Note: See TracBrowser for help on using the repository browser.
© 2008 - 2013 technikum29 • Sven Köppel • Some rights reserved
Powered by Trac
Expect where otherwise noted, content on this site is licensed under a Creative Commons 3.0 License